|
|
Thermal analysis of servomotor
Přibyl, Daniel ; Duroň, Jiří (referee) ; Klíma, Petr (advisor)
This thesis deals with the design of the thermal model of servomotor in program Motor-CAD and using it for analyze of servomotor. In the beginning is a short familiarization about its parts, especially important for the thermal model. Further are described principles of heat exchange. There is a chapter, which is dedicated to the program support of the Motor-CAD. Thermal model and electromagnetic model inputs are tuned according to the measured data. Then a way of active cooling is designed and based of it the model in program is edited. Using the model is found the points of load of the motor for maximum allowable temperature with water cooling. In the conclusion is a valorization of benefit of water cooling for the servomotor.
|
|
|
Water cooling intensity prediction for given thickness of oxide layer
Haluza, Vít ; Hrabovský, Jozef (referee) ; Pohanka, Michal (advisor)
This diploma thesis is dealing with the impact of oxide scales on heat conduction. One of the main tools that were used are numerical simulations. Heat conduction is modelled by solving partial differential equations. Regression models and artificial neural networks are used for the prediction of the influence of oxides on cooling intensity. Determination of the conditions when the cooling was intensified and comparison of individual methods of prediction are the main results of the thesis.
|
|
|
Design of MR clutch water cooling
Musil, Marek ; Strecker, Zbyněk (referee) ; Roupec, Jakub (advisor)
This paper describes the design and manufacture of water refrigeration for magneto clutch. MR clutch cooling problem was solved by designing of several variants of which was finally chosen the best. Model of water cooling was developed and subsequently made. The cooling is consolidated on a stator of MR clutch. Cooling completely surrounds the body of an MR clutch and thus achieves a high heat transfer between the cooling system and cooled. The proposal was developed with a view to good foldability, so its use is not complicated.
|
|
| |
|
|
Innovation of the Cooling System of Rotating Electrical Machines using CFD Methods
Sikora, Michal ; Ondrůšek, Čestmír (referee) ; Kotrba,, Vít (referee) ; Sháněl, Martin (referee) ; Kratochvíl, Ctirad (advisor)
This thesis deal with design and implementation of innovative cooling method, intended primarily for medium-power synchronous generators. The main objective of this proposal is to remove the large heat exchanger connected to generator. This heat exchanger unduly increases the space requirements for the machine location. The proposed solution is to use a direct water-cooled stator. It is assumed that the rotor winding will be still cooled by air. Unlike current cooling system, the hot air from the rotor can be cooled in smaller cooler inside the generator. In this work are described methods which can be used for design of water cooling basic parameters, taking required temperatures into account. A small induction motor was selected for practical verification of the proposed cooling concept. This motor was modified into two variants - related to the old cooling of synchronous generators and related to the proposed solution. Both of these variants were measured and compared with each other. Subsequently, CFD models of these two variants were set up. Measured temperatures were used for debugging of models and identification of material properties of components of these machines. The final model of water-cooled variant also makes it possible to simulate the work of motor for higher performance and to determine the overload compared with the old cooling variant. Some knowledge and experience obtained from the small water-cooled induction machine were used in the design of water-cooling for large synchronous generator. In a similar way, CFD models of the old variant of cooling and proposed variant of water- cooling were created. Although these models were not verified by actual measurements on the generators, the results indicated that the application of water-cooling in this type of machine is appropriate and provides many benefits.
|
|
|
Business Plan
Kloc, Arne ; Navrátil, Jaroslav (referee) ; Rompotl, Jaroslav (advisor)
The diploma thesis is focused on creation of a business plan for establishing a new company. Company makes a new computer sets with water cooling system and own design. The analysis of internal and external environment of the company and particular bisuness plan, are based on theoretical part resources.
|
|
|
Thermal model of solid rotor high-speed induction motor with water cooling
Súkeník, Jakub ; Vítek, Ondřej (referee) ; Toman, Marek (advisor)
This paper deals with thermal calculations of high-speed induction machine with a solid rotor with a copper coating and water cooling. The first part presents the basic equations and mechanisms of heat transfer, and also describes the method of heat network. In~the~next section, thermal resistances for individual parts of the machine and water cooling are derived. The third part describes the distribution of nodes in the heat network of~the induction machine. The last part contains the results of the heat network for~the~high-speed induction machine with the solid rotor with the copper coating and water cooling. Functionality of the created heat network was verified using Ansys software.
|
|
| |
|
|
Thermal analysis of servomotor
Přibyl, Daniel ; Duroň, Jiří (referee) ; Klíma, Petr (advisor)
This thesis deals with the design of the thermal model of servomotor in program Motor-CAD and using it for analyze of servomotor. In the beginning is a short familiarization about its parts, especially important for the thermal model. Further are described principles of heat exchange. There is a chapter, which is dedicated to the program support of the Motor-CAD. Thermal model and electromagnetic model inputs are tuned according to the measured data. Then a way of active cooling is designed and based of it the model in program is edited. Using the model is found the points of load of the motor for maximum allowable temperature with water cooling. In the conclusion is a valorization of benefit of water cooling for the servomotor.
|
|
|
Thermal model of solid rotor high-speed induction motor with water cooling
Súkeník, Jakub ; Vítek, Ondřej (referee) ; Toman, Marek (advisor)
This paper deals with thermal calculations of high-speed induction machine with a solid rotor with a copper coating and water cooling. The first part presents the basic equations and mechanisms of heat transfer, and also describes the method of heat network. In~the~next section, thermal resistances for individual parts of the machine and water cooling are derived. The third part describes the distribution of nodes in the heat network of~the induction machine. The last part contains the results of the heat network for~the~high-speed induction machine with the solid rotor with the copper coating and water cooling. Functionality of the created heat network was verified using Ansys software.
|
guest ::
